Porsche Cayenne 2020, Руководство пользователя

Страница: 332 / 366

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Windshield Wipers
330
WARNING
Undesired wiping
In rain sensor mode, the windshield wipers wipe au-
tomatically when water is detected on the
windshield.
e Always switch off the windshield wipers before
cleaning the windshield.
NOTICE
Risk of damage to the hood, windshield and wiper
system.
e
Only wipe the windshield when sufficiently wet,
otherwise it could become scratched
e Carefully detach frozen wiper blades from the
windshield before driving.
e Do not operate a frozen windshield washer
system.
e Always switch off windshield wipers in car
washes to prevent them from wiping uninten-
tionally (rain sensor mode).
e Always hold the wiper arm securely when re-
placing windshield wipers.
e Pay attention to the varying length of wiper
blades when replacing them.
e Always switch off windshield wipers before
opening the hood (wiper lever in position 0 ). Risk
of collision! If the wiper arms are not at their final
position, switch the wiper system on and off
briefly so that the wipers move to their end
position.
Operating windshield wipers
Fig. 251: Windshield wiper lever
0 – Windshield wipers off
When the windshield wipers and the ignition are
switched off, the wipers move up slightly from their
rest position so that the wiping edges are aligned
correctly.
1 – Windshield wiper rain sensor operation
e
Move wiper lever upward to the first detent.
2 – Windshield wipers slow
e Move wiper lever upward to the second detent.
3 – Windshield wipers fast
e Move wiper lever upward to the third detent.
4 – Windshield wiper one-touch operation
e Move wiper lever downward.
The windshield wipers carry out one wiping
cycle.
e Press and hold the wiper lever downward.
The windshield wipers wipe fast.
5 – Windshield wiper and washer system
e Pull wiper lever toward the steering wheel.
The washer system wipes and sprays while the
lever is pulled toward the steering wheel. When
the wiper lever is released, a few drying wipes are
performed.
Information
The quantity of water sprayed depends on the speed
driven and on how long the wiper stalk is actuated.
Information
e If windshield is very dirty, repeat the cleaning
process.
e Persistent dirt (e.g. insect remains) should be
removed regularly.
Windshield wiper blades in perfect condition are vi-
tal for ensuring a clear view.
Information
During every 10th washing process, the Night View
Assist camera is cleaned at the same time.
Setting rain sensor operation
When the rain sensor is activated, the amount of rain
on the windshield is measured. The wiper speed is
automatically adjusted accordingly.
At a driving speed below approx. 2.5 mph (4 km/h),
rain sensor operation is activated automatically
when the windshield wipers are switched on (wiper
lever in position 2 ). If a speed of approx.
7 mph (12 km/h) is exceeded, the system switches
to the preselected wiper speed.