Porsche Cayenne 2020, Руководство пользователя

Страница: 131 / 366

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Garage door opener (HomeLink
®
)
129
Garage door opener
(HomeLink
®
)
WARNING
Pinching, crushing or
impact through operated
equipment
If persons or animals are in the movement area of
the operated equipment, there is a risk of injury
while the garage door opener is being operated or
programmed.
e Make sure there are no persons, animals or ob-
jects in the movement area of the operated
equipment while the HomeLink
®
system is being
operated or programmed.
e Observe the safety instructions for the original
remote control.
Fig. 71: Programming the garage door opener
With the HomeLink
®
system, up to three items of
remote-controlled equipment (e.g. garage door/gate
to your property, security systems, house lights) can
be operated from inside the vehicle using the mem-
ory buttons on the overhead console.
>
Observe the instructions for the original hand
transmitter.
Information
For information on the compatibility of your vehicle’s
HomeLink
®
system with the original remote control:
e
Contact an authorized Porsche dealer.
>
Visit www.homelink.com or call the toll-free
hotline on 1–800–355–3515.
Information
e Before selling your vehicle, remember to delete
the garage door opener signals.
Programming the garage door
opener
Configure the garage door opener via the touch dis-
play on the dashboard.
b b The ignition is switched on.
b b Engine is not running.
b b
Vehicle is positioned to allow visual contact with
remote-controlled equipment and is within the
receiver range (signal is transmitted).
Systems with remote control
1. Select CAR e CONTROL e Vehicle e
Garage door opener
e
Configure buttons .
2. Choose the button you want to program.
3. Follow the instructions on the screen and make
sure the remote control is facing the overhead
console at the height of the center console
during programming.
The light indicator A on the button flashes or-
ange when the vehicle is ready for reception.
Press the remote control.
Systems without rolling code system:
The light indicator A on the button lights up
green.
Programming is completed successfully.
– or –
Systems with rolling code system:
The light indicator A on the button flashes
green.
The remote control has been taught. Manual
synchronization with the vehicle is still required
to complete programming.
4. Follow the instructions on the screen.
>
Read the instructions for the original remote
control.
Information
e Make sure that there is a new battery in the
garage door opener remote control. Insufficient
battery power can cause malfunctions in signal
transmission. The system in the vehicle then
learns an incorrect code, which cannot be reliably
recognized.
Check the compatibility of the vehicle's
HomeLink
MD
system with the original remote
control.
Systems without remote control (FixKit
receiver)
1. Select CAR
e
CONTROL
e
Vehicle
e
Garage door opener
e
Options .
2. Follow the instructions on the screen.
e Contact an authorized Porsche dealer.
If the signals cannot be assigned to the buttons
despite having carefully read this chapter and the
operating instructions for the original remote control:
e