Porsche Cayenne 2020, Руководство пользователя

Страница: 282 / 366

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Transmission
280
e
Slowly remove your foot from the accelerator
pedal.
The system evaluates the driving data and auto-
matically initiates coasting mode in appropriate
driving situations.
Initiating coasting mode manually
b b Cayenne, Cayenne Coupé, Cayenne S,
Cayenne S Coupé, Cayenne GTS,
Cayenne GTS Coupé, Cayenne Turbo,
Cayenne Turbo Coupé
b b NORMAL driving mode selected.
b b Operating mode D selected.
b b Porsche Stability Management (PSM) active.
b b
Cruise control mode not active.
b b
Adaptive Cruise Control (ACC) not active.
b b Porsche InnoDrive (PID) not active.
b b No major inclines or slopes.
b b Auto Start Stop function switched on (only Cay-
enne, Cayenne Coupé, Cayenne S,
Cayenne S Coupé, Cayenne Turbo,
Cayenne Turbo Coupé).
1. Remove your foot from the accelerator pedal
completely.
2. Use the gearshift paddle or the selector lever to
manually shift up beyond the highest possible
gear.
Coasting mode is initiated.
Exiting coasting mode
e Press the accelerator pedal.
– or –
e
Shift gear using the shift paddle or selector lever.
The engine is engaged again and coasting mode
is exited.
Driving off with Performance Start
The Performance Start function achieves maximum
acceleration from a standing start.
WARNING
Loss of control over the
vehicle or endangering
other road users
In some situations (poor road conditions, driver in-
attention, etc.) control over the vehicle may be lost
or other road users may be endangered as a result.
e Only use Performance Start on public roads if the
road and traffic conditions permit.
e Do not endanger other road users when using
Performance Start.
Information
Stresses on components increase significantly when
driving off at maximum acceleration compared to
normal driving off.
b b Engine is at operating temperature.
b b
SPORT PLUS mode activated.
1. Press the brake firmly with your left foot.
2. Quickly depress the accelerator pedal fully and
hold it down.
The engine speed levels off automatically. A
message appears on the instrument cluster indi-
cating that the Performance Start function is
active.
3. Release the brake within a few seconds.
Driving off with e-Launch
b b E-Hybrid vehicles
The e-Launch function is used to achieve maximum,
purely electric acceleration from a standstill.
b b The high-voltage battery should be as fully
charged as possible.
1. Activate E-POWER mode.
2. Press the brake with your left foot.
3. Press the accelerator pedal until a message re-
garding an active e-Launch function appears in
the instrument cluster and stop at that point.
4. Release the brake within a few seconds.
Information
In the E-POWER driving program, the accelerator
pedal has a hybrid-specific end point. When this end
point is exceeded, the combustion engine is started.