Porsche Cayenne 2020, Руководство пользователя

Страница: 210 / 366

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Porsche Active Safe (PAS)
208
Porsche Active Safe (PAS)
Within the system limits, the Porsche Active Safe
functions can initiate measures to protect the occu-
pants and other road users in certain dangerous
situations.
Porsche Active Safe (PAS) has the following
functions
1
:
– Warning and braking functions
– Preventive occupant protection functions (de-
pending on equipment)
– Distance warning (depending on equipment)
The camera behind the windshield detects the area
ahead of the vehicle. Within the system limitations,
an impending frontal collision with other vehicles,
pedestrians or cyclists can be detected both in the
urban and extra-urban speed range. The system
warns the driver visually, acoustically and if neces-
sary through a braking jolt. Where required, the sys-
tem can support the driver's braking or initiate
partial or full deceleration in order to reduce the
collision speed or prevent the collision in some
circumstances.
Other Porsche Active Safe functions can be installed,
depending on vehicle equipment:
– In conjunction with the preventive occupant
protection function, the front seat belts are ad-
ditionally reversibly pretensioned and, depending
on the equipment version, preconditioning
measures initiated in the passenger
compartment.
– By networking different vehicle systems such as
PSM, the system initiates preventive protection
measures for the occupants if emergency brak-
ing by the driver, for example, is detected.
Exceptions for Porsche Active Safe (PAS)
PAS is restricted or not available in the following
situations:
– If the seat belts are not fastened.
– When reversing.
– If brake lights are defective.
– If there is a fault in Porsche Stability Manage-
ment or the airbag control unit.
– In the event of restricted or switched-off PSM
functionality (PSM off).
– Triggering times and functions are adapted or
deactivated depending on the selected off-road
mode.
– When Porsche Hill Control (PHC) is ready or ac-
tive, PAS is not available.
– Up to 10 seconds after switching on the ignition.
The light indicator comes on.
Switching PAS on and off
e ASSIST e Porsche Active Safe
When Porsche Active Safe (PAS) is switched off or
not available, the display
appears in the instru-
ment cluster.
A deactivated system is activated again when the
ignition is switched back on.
NOTICE
e Switch off PAS when using the vehicle off public
roads or when it is loaded onto a transport truck,
train, ship, etc. The reason for this is to prevent
undesired PAS interventions.
e
Not all Porsche Active Safe protection measures
will be triggered, depending on the detected
danger.
e
Always drive according to the regulations that
apply in each country, particularly with regard to
vehicle handling, distance from the vehicle in
front, speed, etc. The driver is always responsible
for complying with the relevant regulations that
apply in each country.
e PAS must be deactivated while the vehicle is
being towed.
Warning and braking functions
Within the system limits, PAS can warn against im-
pending collisions and initiate the appropriate brak-
ing maneuvers. The system is active from a speed of
approx. 3 mph (5 km/h).
It can react to pedestrians or cyclists from a speed of
approx. 3 mph (5 km/h) up to 53 mph (85 km/h). It
can react to vehicles from a speed of approx.
5 mph (10 km/h) up to 156 mph (250 km/h).
If detected in time, the system can assess a dan-
gerous situation and respond accordingly.
Dangerous situations can arise, for example:
– If a vehicle in front brakes sharply.
– If your vehicle is approaching a significantly
slower-moving or stationary vehicle in the driv-
ing direction.
– If a pedestrian or cyclist is standing or moving
into the driving lane.
If detection is not possible, Porsche Active Safe does
not react.
1. Not available in some country versions.