Porsche Cayenne 2020, Руководство пользователя

Страница: 164 / 366

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Lights
162
draws the direction of vision onto the lane being
driven on. The driver is less dazzled by the oncoming
traffic.
Signage glare reduction (Canada only)
b b High Beam Assistant switched on.
The glare of reflective traffic signs and other signage
can – particularly when driving with high beams –
cause the driver to be dazzled.
The signage glare reduction briefly dims individual
LED segments of the vehicle's low or high beam
headlights in a targeted manner. The driver is
dazzled less due to reflecting traffic signs and other
signage.
Automatic headlight calibration (Canada only)
b b
No objects in the immediate vicinity of the
vehicle.
b b
Vehicle positioned as straight as possible in front
of a projection surface, e.g. wall (distance > 16.4
ft. (5 m)).
b b Low beam active during reference run while
stationary.
Automatic headlight calibration starts automatically
provided the conditions are right (ambient lighting,
good projection surface). The LED segments of the
headlight are automatically activated and deacti-
vated repeatedly from right to left during calibration
and are detected by the camera A .
Calibration is used to check headlight alignment and
does not replace manual headlight adjustment.
Operating turn signal and high
beam lever
Fig. 99: Actuating turn signals, high beam and headlight
flasher
1 Left turn signal/parking light
2 Right turn signal/parking light
3 High beam/high beam assist
4 Headlight flasher
Activating the turn signals
e Push the lever past pressure point 1 or 2 . The
turn signal remains active until the lever is re-
turned to the home position either manually or
automatically when the steering wheel is turned.
Comfort turn signal
e Push the lever once to pressure point 1 or 2 .
The turn signal lights flash three times.
e
In order to interrupt, comfort turn signals press
the lever in the opposite direction.
Switching high beam on and off
b b Vehicles without PDLS Plus
– or –
LED-Matrix high beam assistant setting
deactivated.
Switching on
e Press the lever once to pressure point 3 .
The light indicator comes on.
Switching off
e
Press the lever once to pressure point 4 .
The light indicator goes out.
Activating and deactivating high beam assist
b b Vehicles with PDLS Plus.
b b Automatic headlights switched on.
b b
LED-Matrix high beam assistant setting
activated.
> Please see chapter "Vehicle Settings" on
page 285.
Activating
e
Press the lever once to pressure point 3 .
The light indicator comes on. Depending on
various factors, e.g. the position of other vehicles
and the speed, the system switches from low
beam to high beam and back again. If high beam
is activated, the light indicator
lights up.
Deactivating
e
Press the lever once to pressure point 4 .
High beam assist can only be deactivated when
the light indicator
lights up.
If the preconditions for high beam assist are not met,
high beam can be switched on and off manually.
Switching on manually
e Press the lever twice to pressure point 3 .
The light indicator comes on.
Switching off manually
e
Press the lever once to pressure point 4 .
The light indicator goes out.