Porsche Cayenne 2020, Руководство пользователя

Страница: 327 / 366

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Wheels and Tires
325
Changing a wheel
WARNING
Working under the
vehicle
The vehicle can slip off the jack.
e Make sure that there is no one inside the vehicle
when jacking it up and changing the wheel.
e Raise the vehicle only at the prescribed jacking
points on the vehicle underbody.
e
Never jack up the vehicle on a surface that slopes
up, down or to the side.
e
Only use the jack to raise the vehicle for chang-
ing a wheel.
e
Always place the vehicle on solid supports when
working under the vehicle.
Information
The tools needed for changing wheels (jack, wheel
bolt wrench, mounting aids, etc.) are not included in
the standard scope of supply for the vehicle.
e For information on the tool required: Contact an
authorized Porsche dealer.
Information
The tire and wheel sizes on both axles are different.
When removing the wheels, mark the direction of
rotation and position on each wheel and carry out
the installation according to these markings.
e Only use wheels/tires with approved dimensions
for the relevant axle.
>
Please refer to the vehicle registration docu-
ments or the "Technical data" section of this
manual.
Caring for wheel attachment faces
Fig. 242: Wheel attachment faces
NOTICE
Risk of damage to the wheel and wheel attachment
face.
e The wheel attachment face B on the brake disk,
wheel hub and on the wheel itself must not be
greased.
e Only the areas A may be greased. Grease these
areas very thinly with Optimoly
®
TA: Contact an
authorized Porsche dealer. Do not use any other
grease or paste.
Care of wheel bolts
e Clean the wheel bolts before installation.
e Wheel bolts must not be greased.
e Replace damaged wheel bolts. Only use genuine
Porsche wheel bolts assigned especially to this
model or wheel bolts of similar quality that have
been manufactured according to Porsche speci-
fications and production requirements.
e Tighten wheel bolts with a tightening torque of
118 ftlb. (160 Nm).
e Do not use any power tools such as impact
wrenches.
Using security wheel bolts
Fig. 243: Adapter for security wheel bolts
The adapter for the security wheel bolts is in the tool
box.
e To loosen and tighten the wheel bolt with anti-
theft protection, the adapter must be used be-
tween the wheel bolt and the wheel bolt wrench.
e When positioning the adapter, ensure that it en-
gages fully in the teeth of the wheel bolt.