Porsche 911 2020, Руководство пользователя

Страница: 84 / 360

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Car Care
82
on the brake disks may impair braking performance.
e Make sure that no cleaning agent comes into
contact with the brake disks.
e If cleaning agents do come into contact with the
brake disks, clean the brake disks thoroughly
with a strong jet of water.
e Paying attention to any traffic behind you, dry
the brake disks by applying the brake.
Metal particles (e.g. brass or copper in brake dust)
must not remain too long on alloy wheels. Contact
corrosion can cause pitting.
Cleaners with an oxide-removing effect or incorrect
pH value, as are commonly used for other metals, as
well as mechanical equipment and products, will
damage the surface and are therefore unsuitable.
e Only use acid-free cleaners for alloy wheels (pH
value between 4 and 10). Products with the in-
correct pH value can destroy the surface of the
wheels.
e If possible, wash the wheels every two weeks
with a sponge or washing brush. If the wheels are
exposed to grit or industrial dust, weekly clean-
ing is necessary.
Cleaning door, roof, lid, and win-
dow seals
NOTICE
The lubricant coating on the inner door seals may be
damaged by unsuitable cleaning agents and care
products.
e
Do not use chemical cleaning agents or solvents.
e Do not use care products.
To ensure proper cleaning of your vehicle, please
observe the following:
e Wash dirt (e.g. abrasion, dust, road salt and grit)
from all seals regularly using warm soapy water.
e If there is a risk of frost, protect the outer door
seals and lid and flap seals from freezing using a
suitable care product.
Leather care
NOTICE
The leather may become damaged by the use of
unsuitable cleaning agents and care products, and
by inappropriate treatment.
e Do not use aggressive cleaners or hard cleaning
objects.
e Make sure that perforated leather does not get
wet on its reverse side.
e Remove water drops from the leather
immediately.
To ensure proper cleaning and care of your vehicle,
please observe the following:
e Clean all types of leather regularly to remove fine
dust using a soft, white woolen cloth, or a com-
mercially available microfiber cloth.
e
Remove heavy soiling ( not water or moisture
stains) with a leather cleaning agent. Follow the
application instructions on the containers.
Porsche recommends car care products from
Porsche Tequipment.
e
Treat cleaned leather only with a leather care
product.
Cleaning seats with seat ventilation
Rain water or moisture can stain the perforated
leather of the seats.
Removing water and moisture stains
b b Seat heating and seat ventilation is switched off.
b b Ensure there is no direct sunlight.
1. Blot the entire seat and backrest surface using a
clean, absorbent sponge and distilled water.
Make sure that perforated leather does not get
wet on its reverse side.
2. Allow the seat covering to dry completely at
room temperature out of direct sunlight. Do not
switch on the seat heating and seat ventilation to
do this.
3. Once dry, wipe the seat covering with a dry, lint-
free cloth.
Cleaning carpet, floor mats
WARNING
Obstructed pedals
Unsuitable floor mats or floor mats that are not
properly secured can restrict the movement of the
pedals or interfere with actuation of the pedals. The
accelerator pedal can be depressed unintentionally
or the brake pedal blocked. This can result in an un-
expected increase in the driving speed or make
braking difficult.
e Only use floor mats that are suitable for the
vehicle.
e
Secure the floor mats properly and do not lay
them loosely.
e
Do not lay several floor mats on top of each
other.
e Ensure that the floor mats are securely fitted
again after they have been removed, e.g. for
cleaning.
To ensure proper cleaning of your vehicle, please
observe the following: