Porsche 911 2020, Руководство пользователя

Страница: 232 / 360

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Seat Belts
230
Observe the seat belt warning
light and warning message
Fig. 179: Seat belt status display on the instrument cluster
A Seat belt status display for the left rear seat
B Seat belt status display for the right rear seat
C Warning symbol: Driver’s or passenger seatbelt not
fastened
Front seats
When the ignition is switched on, a warning signal
sounds and the red warning symbol
C on the in-
strument cluster flashes for 6 seconds if the driver's
or passenger seatbelt has not been fastened. The red
warning symbol on the instrument cluster stays on
after 6 seconds until the driver's seatbelt and, if oc-
cupied, the passenger's seatbelt have been fastened.
A warning message is also displayed in the instru-
ment cluster.
When the speed of the vehicle reaches approxi-
mately 15 mph (24 km/h), a warning signal also
sounds and the red warning symbol C in the in-
strument cluster flashes if the driver's seat belt or
passenger seat belt, if occupied, is not fastened.
Rear seats
When the vehicle drives off, a seatbelt status display
for the rear seats appears for about 60 seconds on
the instrument cluster.
The green symbol
A indicates that the person
sitting on this seat has fastened their seat belt.
The red symbol
B indicates that the person sitting
on this seat has not fastened their seatbelt, or no one
is sitting on this seat. If a seatbelt on the rear seats is
opened while driving, an acoustic warning signal
sounds and the relevant symbol flashes red
for
around 60 seconds.
Fastening seat belt
Fig. 180: Fastening seat belt
1. Assume a comfortable seating position.
2. Adjust the backrest so that the shoulder belt
passes over the center of your shoulder and is
positioned on your upper body.
3. Grasp the seat belt by the belt latch and pull it
slowly and evenly over your chest and hip.
Information
The seat belt can jam in the following situations:
– Vehicle is at an angle.
– Seat belt is pulled out abruptly.
– When accelerating or decelerating, when nego-
tiating bends or on inclines.
4. Insert the belt latch into the relevant seat-belt
buckle on the inner side of the seat until it locks
with an audible click.
5. Make sure that the seat belt is not trapped or
twisted and that it is not rubbing against sharp
edges.
6. Ensure that the lap belt fits tautly across the lap.
After fastening the seat belt, tension the lap belt
by pulling the shoulder belt up.
For pregnant women: Position the lap belt so that
it is as far down on the lap as possible and not
pressing against the abdomen.
7. During the journey, pull on the shoulder belt oc-
casionally to ensure that the lap belt remains
under tension.