Porsche 911 2020, Руководство пользователя

Страница: 68 / 360

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Auto Start Stop function
66
Auto Start Stop function
When the vehicle stops, e.g. at a traffic light or in a
traffic jam, the engine automatically stops, provided
all the requirements for the auto stop function are
met. In addition, the engine can also stop automati-
cally when the vehicle stops while moving at walking
speed. In this way, the Auto Start Stop function
helps to save fuel.
The ignition remains on, even when the engine is
stopped automatically. All safety functions continue
to operate.
Prerequisites for the auto engine stop
b b Auto Start/Stop function switched on.
b b Engine, transmission and air conditioning have
reached operating temperature.
b b The vehicle has traveled at least at walking
speed since the last automatic engine stop.
Vehicles with PDK
b b Brake pedal pressed.
b b Operating mode D , M , N or P selected.
b b Driver’s seat belt fastened or driver’s door
closed.
Vehicles with manual transmission.
b b Driver's door closed.
b b
Gear lever in neutral and clutch pedal released.
Vehicles with manual transmis-
sion
1
: Engine stop and engine
start
Engine stop
1. Brake the vehicle with the footbrake.
2. Move the gear lever to neutral.
3. Release the clutch pedal.
The engine stops.
Engine start
e Press the clutch pedal.
You can drive off normally.
Information
The engine will start automatically in certain situa-
tions, e.g. in order to maintain a comfortable tem-
perature. The gear lever must be in neutral. In some
cases, a message prompting you to press the brake
pedal will be displayed on the instrument cluster.
Reaction after leaving the vehicle
If the driver's door is opened during an automatic
engine stop, the engine will not start automatically .
An automatic engine start can still be performed by
pressing the clutch pedal down fully.
Auto Start Stop mode is resumed if one of the fol-
lowing requirements is detected:
– The brake pedal is pressed, the driver's door is
closed and the driver's seat belt is fastened.
– or –
The driver's door is closed and the driver's seat
belt is then fastened.
– or –
The accelerator pedal is pressed with the driver's
door closed and the driver's seat belt fastened.
If the driver leaves the vehicle while the engine has
stopped automatically (driver's door open and pedals
released), the requirements specified above must be
detected within 30 seconds in order for the engine
to start and Auto Start Stop mode to be resumed.
Switching off the Auto Start Stop function within 30
seconds after leaving the vehicle will result in an
engine start only after closing the driver's door and
fastening the driver's seat belt. If none of these re-
quirements are met, the engine must be started
manually 30 seconds after leaving the vehicle. A
message prompting you to start the engine manually
appears on the instrument cluster.
> Please see chapter "Starting and Stopping the
Engine" on page 245.
Vehicles with PDK: Engine stop
and engine start
Engine stop
1. Brake vehicle with the brake pedal.
2. Press and hold the brake pedal.
– or –
e Press the P button on the selector lever when the
vehicle is stationary.
1. Equipment may be available for use only at a later time or is only available in certain markets.