Porsche 911 2020, Руководство пользователя

Страница: 132 / 360

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Fuses
130
Fuses
DANGER
Electrical shock
Replacing fuses or relays with the engine running or
the ignition on could cause electrical shock.
e
Always switch off the engine and the ignition
when working on the electrical system.
WARNING
Short circuit
Working on the electrical system of the vehicle can
result in a short circuit. The short circuit can cause a
fire.
e Always disconnect the negative terminal on the
battery when working on the electrical system.
WARNING
Improper intervention
and incorrect
accessories
Improper intervention in the fuse box and the use of
the incorrect accessories can result in damage and
malfunctions in electrical and electronic systems.
e
Do not attempt to replace any electrical compo-
nents except the fuses listed here (e.g. relays).
e
Go to a qualified specialized repair shop. Porsche
recommends an authorized Porsche dealer, as
they have trained technicians and the necessary
parts and tools.
e Only use accessories that have been approved by
Porsche. For information on approved accesso-
ries: Contact an authorized Porsche dealer.
Checking and changing fuses
To prevent short-circuits and overloading of the
electrical system, the individual circuits are pro-
tected by fuses.
Fuse boxes are located in the footwell on the driver's
and passenger's side.
Depending on the equipment, further fuse boxes are
located at various locations in the vehicle, which are
only accessible to an authorized Porsche dealer.
Fuse ratings
Color Amperage
rating
Light brown 5 A
Brown 7.5 A
Red 10 A
Blue 15 A
Yellow 20 A
White / clear 25 A
Green 30 A
Blue-green 35 A
Orange 40 A
Checking and changing fuses
The numbering of the fuse slots is printed or em-
bossed on the inside of the cover of or on the fuse
carrier.
Unassigned fuse slots are not listed in the following
overviews.
1. If possible, switch off the load with the defective
fuse.
2. Open the relevant fuse box cover.
3. If necessary, carefully remove the purple plastic
strip over the fuses.
4. Remove the fuse from its slot using the yellow
plastic gripper in order to check it. A blown fuse
can be identified by the melted metal strip.
5. Insert a new fuse. The replacement fuse must
have the same rated current as the one it is
replacing.
6. Fit the purple plastic strip back into place.
If the same fuse blows repeatedly, the cause of the
fault must be corrected immediately.
e
Visit an authorized Porsche dealer. Porsche rec-
ommends an authorized Porsche dealer, as they
have trained technicians and the necessary parts
and tools.