Porsche 911 2020, Руководство пользователя

Страница: 326 / 360

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Windshield Wipers
324
Setting the wiper speed
Fig. 276: Switch for rain sensor/intermittent operation
In vehicles without a rain sensor, the wiper speed of
the windshield wipers can be adjusted in 4 settings:
Reducing wiper speed
e Move switch A upward.
The setting is confirmed by one wipe of the
windshield.
Increasing wiper speed
e Move switch A downward.
Setting rain sensor operation
The amount of rain on the windshield is measured in
vehicles that have a rain sensor. The wiper speed is
automatically adjusted accordingly.
At a driving speed below approx. 2.5 mph (4 km/h),
rain sensor operation is activated automatically
when the windshield wipers are switched on.
After exceeding a speed of approx. 5 mph (8 km/h),
the system switches to the preselected wiper
setting.
Information
– If the wiper lever is already in position 1 when the
ignition is switched on, the rain sensor remains
activated at speeds above approx. 2.5 mph (4
km/h).
– If the wiper lever is already in position 2 or 3
when the ignition is switched on, the rain sensor
remains switched off until the wiper lever is
moved.
Information
Opening the luggage compartment lid stops the
wiper.
e To switch on the wiper again, press the wind-
shield wiper lever upward/downward.
Adjusting rain sensor sensitivity manually
The wiper speed can be adjusted manually:
e Press switch A upward – high sensitivity .
The setting is confirmed by one wipe of the
windshield.
e Press switch A downward – low sensitivity .
Operating the rear wiper
Fig. 277: Switch for rear wiper
Switching on rear wiper intermittent mode
e Press button A .
Switching off rear wiper intermittent mode
e Press button A .
Activating reversing function
When the windshield wipers are active, the rear
wiper performs a few wipes when reverse gear is
engaged. The function can be activated or deacti-
vated in the PCM.
> Please see chapter "Vehicle Settings" on
page 270.