Pioneer passport DCT, Руководство по обслуживанию

Страница: 10 / 156

2
Passport DCT Customer Service Guide
........................................................................................
Introducing Passport DCT
• VCR control
You can control your VCR from your settop so you can record programs either impulsively or
using a timer. Note that this requires special hardware and setup.
•
Sleep setting
You can now set your settop to turn off automatically at a certain time interval.
•
Alarm
The alarm permits you to select a time for turning on and/or off your settop. You can select this
to occur once only or to recur on a combination of days.
• New single or recurring event and VCR timers
With one timer, you can now set your settop to alert you or record a single instance or multiple
instances.
To use Passport DCT, subscribers need the following equipment
• DCT 2000-compatible or DCT 2500-compatible settop
• DCT 2000-compatible or DCT 2500-compatible remote control
• NTSC TV
• Cable connection with Passport DCT service
• VCR Controller (optional). Required if you are setting up the VCR controls through the settop
About the Settop
The settop provides the operating system for Passport DCT, and stores the Passport DCT settings
that subscribers set up. Subscribers navigate through Passport DCT with the remote control; the
settop picks up the remote control signals and passes them to Passport DCT. For more information
about the settop, refer to the settop documentation.
About the Remote Control
Subscribers use the remote control to control the VCR, the TV, the settop, and Passport DCT. To be
able to use the remote control, it must be programmed for the specific model of TV or VCR that the
subscriber has. For information about remote control programming, refer to the remote control
documentation.