Pioneer passport DCT, Руководство по обслуживанию

Страница: 91 / 156

Setting Settop Audio
Passport DCT Customer Service Guide
83
...........................................................................................................................
......
Setting the Volume Level
Passport DCT allows you to set the cable settop’s volume to variable or to a fixed level
(approximately 68-69% of the maximum volume) which is the optimum settop audio output level.
If you set the volume to a fixed level and press the + or - VOL button, the volume level is
automatically set to variable from then on. With a VCR Timer-initiated recording, the settop reverts
to the fixed setting for the duration of the recording.
Note: The first time you use your settop, you should use the procedure which is found on either page 17 or in the
following section (page 85), to set the balance between your devices.
To set the volume level
1 Press the SETTINGS button. The Settings menu displays.
2 Use the up or down arrow button to highlight the Audio preference.
3 Press the right arrow button to move to the Option column. This displays the options for the
Audio preference.