Pioneer passport DCT, Руководство по обслуживанию

Страница: 54 / 156

46
Passport DCT Customer Service Guide
........................................................................................
Using the Program Guide
To suspend timers for a future non-PPV program from the program guide
Note: At any time during this procedure, you can elect to cancel this procedure by pressing the EXIT button. In
that event, there are no changes to the timer.
1 Press the GUIDE button. The program guide displays.
2 Press the arrow buttons to highlight the program timer to be suspended. The program displays
in the program guide, highlight in yellow with a timer symbol.
3 Press the SELECT button. One of the following happens:
• Passport DCT displays the channel. This means that this is not a future program, it is a
current program.
• One of the following displays appear if you have selected a non-PPV program with an
existing timer. The example shows a display for a program that has an event timer set (on
left) and a display for a program that has a VCR timer set (on right).
4 The Suspend <type> Timer option is highlighted. Press the A button to accept the change.
The program guide displays with the program in yellow with the suspend symbol.
Resetting/Resuming Non-PPV Timers
The reasons that you would select this procedure are as follows:
• When you wish to change the type of timer (event to VCR or VCR to event)
• When you set a timer and then decide to make changes to the timer (change the type of
instance), you can elect to reset your timer.
• When you have a suspended a timer that you wish to resume it.