PerkinElmer TORION T-9, Руководство пользователя

Страница: 79 / 276

Sample Analysis . 75
If the Cancel Run button is pressed during the data processing step, the software will stop
processing the data and no results will be saved for that sample.
NOTE: If VNC is being used to navigate the instrument and it becomes necessary to stop the processing of a
sample or performance validation run clicking the ESC key on the computer keyboard will abort the
run process if the buttons Stop Run and Cancel Run are not visible for use on the VNC window.
The following screen shows the library results screen displayed at the end of a run. The table
on the bottom of the screen shows the post run results table, or the library hits, depending on
levels that have been defined in the Chromion software. Red alerts indicate levels set above
50 and Yellow indicates levels below 50.
Refer to the
Analyzing a Sample
section in this chapter for a detailed description of the
table.
NOTE: The system automatically searches the target-ion-compound library. If a peak is detected, it will either
be named accordingly to library searching results, or it will be identified as an unknown if no library
match is found. In addition, the standard instrument method searches the unknown library for the
method of the unknown compound identification automatically on board (989 compounds). These
compounds, if detected, will be illustrated in the hit list with asterisks (*) in front of them. The entire
NIST database may also be searched by connection via cross-over cable to the system PC. Refer also
to the “Searching the External Unknown ID Library” section of this chapter.