PerkinElmer TORION T-9, Руководство пользователя

Страница: 48 / 276

44 . Torion T-9 User’s Guide
Performing an Injection w ith the Custodion Syringe
When performing an injection with the Custodion Syringe on the Torion T-9 GC/MS make sure the
gold rings on the Custodion Syringe touch the contact points on the GC injection port. When the
contact points connect with the Custodion Syringe the instrument automatically starts a run.
Conversely the instrument will NOT start an analysis if the Custodion Syringe does not come in
contact with the contact points.
1. Follow the on screen instructions as to when to depress the plunger to expose the SPME
fiber.
2. Depress the plunger until you hear or feel a click and then release the plunger. Similar to
using a ball-point pen.
The following image shows a cutaway diagram of the SPME inside the GC injector port.
3. Follow the on screen instructions as to when to depress the plunger to
retract
the SPME
fiber inside the protective needle.
CAUTION
ATTENTION
Ensure the SPME fiber is completely w ithdraw n inside the
syringe needle before removing the Custodion from the injector
port; otherw ise the SPM E fiber may be damaged.
Assurez-vous que la fibre SPME est complètement retirée à
l'intérieur de l'aiguille de la seringue avant de retirer le gardien
du port de l'injecteur; Sinon la fibre SPME pourrait être
endommagée.
SPME syringe
Interface between
Custodion syringe and
injector
Injector (hidden
under face plate)
Inlet of GC
Contact Points