PerkinElmer TORION T-9, Руководство пользователя

Страница: 244 / 276

240 . Torion T-9 User’s Guide
11. After entering the new method name and then clicking OK the name will be saved and sent
to the SPS-3 device.
Log Data Tab
The second tab of the Desorption window is the Log Data tab. Using the icon in the mini toolbar
the log files created from desorption runs on the device can be retrieved and saved to a computer.
When clicking the icon
Retrieve Log Data from Device all log files created during desorption runs
will be retrieved from the device into Chromion.
Refer to the SPS-3 (Sample Prep Station) User’s
Guide for enabling the log data functionality on the device.
Various information from the desorption runs will be recorded in the log files.

Method Name - The name of the method used for the specific desorption run.

Date/Time Stamp - The date and time of the desorption run.

Temp (
°
C) - The temperature set in the method parameters.

Leak Check - The response in this column is based on whether or not the leak check was
enabled in the parameter settings of the method.

Module - The specific module on the device that was used for the desorption run. The SPS-
3 can be equipped with two desorption module, i.e. DM1 and DM2.

Flow
- This is the flow rate that was set in the method parameters.

Time (min:sec) -
This is the amount of time for the desorption run. It is also set in the
parameters of the method.

IS Added - This response is whether or not the internal standard was added to the needle
trap after the desorption run.
After the log files have been retrieved from the device into Chromion they can be saved to the
computer by clicking the icon Save Log Data to File . When clicking the icon a Windows browser