Penlon ESO 2, Руководство пользователя, Страница: 63 / 72

ESO 2 ICU Ventilator 57 User Manual
Advanced Spontaneous Breathing Modes (SIMV, SMMV, PSV)
Trigger (PEEP referenced) 0.7 to 4 L/min
Trigger window (SIMV, SMMV) Set 60% of Expiratory Time
V
T
and V
M
(SIMV, SMMV) As Volume Mode
Inspiratory time (Ti) 0.3 to 5 seconds
Support pressure (PSV only) 4 to 70 cmH2O
Default settings
Volume
Adult
Paediatric
V
T
600 ml
150 ml
BPM
10
15
I:E
1:2
1:2
Pmax
38 cmH2O
38 cmH2O
Pressure
Adult
Paediatric
V
T
600 ml
150 ml
BPM
10
15
I:E
1:2
1:2
P-target
10 cmH2O
10 cmH2O
SIMV
Adult
Paediatric
V
T
600 ml
150 ml
BPM
6
15
Insp time
2 sec
1.3 sec
Trigger
1 L/min
1 L/min
SMMV
Adult
Paediatric
V
M
3.6 L
2.2 L
BPM
6
15
Insp time
2 sec
1.3 sec
Trigger
1 L/min
1 L/min
PSV
Adult
Paediatric
Support Pressure
10 cmH2O
10 cmH2O
Insp time
2 sec
1.3 sec
Trigger
1 L/min
1 L/min
Disinfection and Sterilisation
The patient block assembly can be sterilised if necessary - see section 6.2
NOTE: The bellows assembly, oxygen monitor sensor, and spirometer sensors
are built into the breathing module..
Bacterial Filter
None (always use a bacterial filter in the breathing system to protect the oxygen
sensor - see section 5.1.6)
Fail Safe Mechanism
Battery back-up in case of mains electricity failure
Gas shut-off in the event of electronic failure
Reliability
Not applicable
Waveform Tests
Not applicable
Volume Tests
Not applicable
Mobility and Mounting
(a) Mobility
(b) Mounting
Secure mounting required
Control unit and remote screen are mounted on the frame.
The bellows assembly is built into the breathing module.
Breathing module inspiratory and
expiratory non-return valves
Pressure drop across the inspiratory and
expiratory non-return valves at an air
flow of 60 L/min: 0.1 kPa (1 cmH2O).
Appendix
0.02 0.04 0.06 0.08 0.10
60
50
40
30
20
10
Flow
(L/min)
Pressure
(kPa)