manualshive.com logo in svg

Penlon ESO 2, Руководство пользователя, Страница: 20 / 72

Поделиться
Скачать
Penlon ESO 2 Скачать руководство пользователя страница 20

ESO 2 ICU Ventilator 

14 

User Manual

Description

3.2.8.1   Fresh Gas Compensation

Adjusts delivered volume up to 60% 

An alarm is triggered if measured volume varies by 50% from 

the set volume. 

This function is user adjustable (3.2.9).

NOTE
Fresh gas compensation is disabled if: 

The spirometry system is turned OFF through the menu 

system, or the spirometry system is malfunctioning.

3.2.8.2   Fresh Gas Mixture Compensation - models with 

Spirometry

The spirometry system compensates for the fresh gas mixture  

in use.

The Gas Mixture window (Area C) is an active touch-selectable 

area (in any mode), with a drop down menu.

1.  Touch the screen in Area C.

2.  Use the wheel to select:  

O2 + AIR 

Do 

not

 select O2 + N2O

3.  Press to confirm. or, use the menu structure, as shown. 

Select the required mixture with the scroll wheel.

NOTE 
1.  Fresh gas mixture compensation is disabled if: 

The spirometry system is turned OFF through the menu 

system, or the spirometry system is malfunctioning.

2.  If the oxygen monitor is switched OFF, a default mixture is 

assumed.

3.2.8.3  Compliance Compensation

The ventilator will apply compliance compensation to account 

for compliance loss in the breathing system in cases where:

Fresh gas compensation is disabled, or  

Spirometry is unavailable or disabled

NOTE
For correct operation the value of the breathing system 

compliance must be established first, by completing the 

ventilator leak-test as part of the Pre-operation Procedure. 

Refer to section 4, noting that breathing system compliance is 

displayed as ‘Bsys.comp’

If the leak test is not carried out, the default value will be used 

(7 ml/cmH2O). 

NOTE 

In compliance compensation mode any fresh gas used will be 

in addition to the set tidal volume.

3.2.8.4  Altitude Compensation

This function monitors ambient pressure, and adjusts the 

delivered volume accordingly

Altitude compensation is automatically applied during 
calibration of the oxygen monitor - see section 4.3

.

Area A

Area C

Area D

Area B

Area E

Содержание ESO 2









































































Отзывы:

Нет отзывов