PDS spas Summit Series, Руководство пользователя

Страница: 65 / 88

Opera on Systems Summit™ Series | SX ‐ SmartTouch™ Control 62
Sensor ‐ Related
Sensors are Out of Sync—M015**
The temperature sensors MAY be out of sync by 3°F. Call for Service if this message does not disappear within a few minutes.
Sensors are Out of Sync—Call for Service* ‐ M026**
The temperature sensors ARE out of sync. The fault above has been established for at least 1 hour. Call for service.
Sensor A Fault, Sensor B Fault—Sensor A: M031**, Sensor B: M032**
A temperature sensor or sensor circuit has failed. Call for Service.
Communica ons Error
The control panel is not receiving communica on from the System. Call for Service.
*
Some messages can be reset from the panel. Messages that can be reset will appear with a Clear Icon at the bo om of the
Message Screen. Press the Clear Icon text to reset the message.
System Related
Program memory failure* – M022**
At Power ‐ Up, the system has failed the Program Checksum Test. This indicates a problem with the fi rmware (opera on program)
and requires a service call.
The Se ngs have been Reset (Persistent Memory Error)* – M021**
Contact your dealer or service organiza on if this message appears on more than one power ‐ up.
The clock has failed* – M020**
Contact your dealer or service organiza on.
Con fi gura on error (Spa will not Start Up)
Contact your dealer or service organiza on.
The GFCI test failed (System Could Not Test the GFCI) – M036**
(North America Only) May indicate an unsafe installa on. Contact your dealer or service organiza on.
A Pump may be Stuck On – M034**
Water may be overheated. POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service organiza on.
Hot Fault – M035**
A Pump Appears to have been Stuck ON when spa was last powered
POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service organiza on.
* Some messages can be reset from the panel. Messages that can be reset will appear with a Clear
Icon at the bo om of the Message Screen. Press the Clear Icon text to reset the message.
General Maintenance Reminders
Reminder Messages can be suppressed by using the Reminders Screen.
Reminder Messages can be chosen individually by the Manufacturer. They may be disabled en rely, or there may be a limited
number of reminders on a speci
fi c model. The frequency of each reminder (i.e. 7 days) can be speci fi ed by the Manufacturer.
Check the pH
May appear on a regular schedule, i.e. every 7 days. Check pH with a test kit and adjust pH with the appropriate chemicals.