PDS spas Summit Series, Руководство пользователя

Страница: 54 / 88

Opera on Systems Synergy™ Series | FX ‐ ProView™ Control
51
The se ngs have been reset (Persistent Memory Error) *
Contact your dealer or service organiza on if this message appears on more than one power ‐ up.
The clock has failed*
Contact your dealer or service organiza on.
Con fi gura on error (Spa will not Start Up)
Contact your dealer or service organiza on.
The GFCI test failed (System Could Not Test the GFCI)
(North America Only) May indicate an unsafe installa on. Contact your dealer or service organiza on.
A pump may be stuck on
Water may be overheated. POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service organiza on.
Hot fault
A Pump Appears to have been Stuck ON when spa was last powered. POWER DOWN THE SPA. DO NOT ENTER THE WATER.
Contact your dealer or service organiza on.
Reminders
General maintenance helps.
Reminder Messages can be suppressed by using the Preferences Menu.
Clean the fi lter
May appear on a regular schedule, i.e. every 30 days. Clean the fi lter media as instructed by the manufacturer.
Test the GFCI (or RCD)
May appear on a regular schedule, i.e. every 30 days.
The GFCI or RCD is an important safety device and must be tested on a regular basis to verify its reliability. Every user should be
trained to safely test the GFCI or RCD associated with the spa installa on. A GFCI or RCD (European) will have a TEST and RESET
bu on on it that allows a user to verify proper func on.
Change the water
May appear on a regular schedule, i.e. every 90 days. Change the water in the spa on regular basis to maintain proper chemical
balance and sanitary condi ons.
Change the fi lter
May appear on a regular schedule, i.e. every 30 days. Filters should be replaced regularly to maintain proper spa func on and
sanitary condi ons.