PDS spas Summit Series, Руководство пользователя

Страница: 59 / 88

Time ‐ of Day
Be sure to set the Time ‐ of Day
Se ng the me ‐ of ‐ day is important for determining fi ltra on mes and other background features. The Heat Icon on the
Se ngs Screen takes you to a screen where you control the Time ‐ of ‐ Day.
On the Time ‐ of ‐ Day screen, simply select the Hours and Minutes. Use the Up and Down Bu ons to make changes, then Save. If no
me ‐ of ‐ day is set in the memory an Informa on Screen will appear. If you exit it and Informa on Icon will appear at the bo om of
the Main Screen, un l the me ‐ of ‐ day has been set. NOTE: If power is interrupted to the system, Time ‐ of ‐ Day will be maintained
for several days.
Adjus ng
Main Filtra on
Using the same adjustment as Se ng the Time, Filter Cycles are set using a start me and a dura on. Each se ng can be adjusted
in 15 ‐ minute increments. The panel calculates the end me and displays it automa cally. The Filter Icon on the Se ngs
Screen takes you to a screen where you control the Filter Cycles.
Filter Cycle 2 ‐ Op onal Filtra on
Filter Cycle 2 is OFF by default. Press “1” to view Filter 1. Press “2” once to view Filter 2. Press “2” again to turn Filter 2 ON or OFF.
When Filter Cycle 2 is ON, it can be adjusted in the same manner as Filter Cycle 1.
It is possible to overlap Filter Cycle 1 and Filter Cycle 2, which will shorten overall
fi ltra on by the overlap amount.
The Meaning of Filter Cycles
1. The hea ng pump always runs during the fi lter cycle*
2. In Rest Mode, hea ng only occurs during the fi lter cycle
3. Purges happen at the start of each fi lter cycle
*For example, if your spa is set up for 24/hour circula on except for shu ng o ff when the water temperature is 3 ˚ F/1.3 ˚ C above the
set temperature, that shuto ff does not occur during fi lter cycles.
Main Filtra on
Viewing Filter 1 while Filter 2 is OFF
Viewing Filter 1 while Filter 2 is ON
Opera on Systems Summit™ Series | SX ‐ SmartTouch™ Control 56