PDS spas Summit Series, Руководство пользователя

Страница: 12 / 88

Ozonator: Your EverPure2™ system of Ozone and UV is a standard feature on all swim and
fi tness spas and operate in conjunc on with your fi ltra on system. Ozone is a gas, O
3,
that has
been used for years as a sanita on treatment for drinking water, and now as a proven puri fi er
for swim spas and hot tubs. The EverPure2™ o ff ers advanced puri fi ca on with the addi on of
the UV element further reducing the use of harsh chemicals for sanita on and minimizing overall
maintenance. On all dual zone models, the hot tub zone features EverPure™ for ozone
puri
fi ca on.
Slide Valves: Valves are used to shut o ff the water fl ow to the heater, circula on pump,
Secondary pump, and Fitness pumps for speci fi c service problems.
Support Pack: The control system operates all func ons of the swim spa. Make sure your
electrician connects the power supply accordingly to all Na onal Electric Code, and shows you
how to test the GFCI circuit breaker (not supplied). This pack is connected to a 50 amp breaker
and for dual zone products; FX219, FX219s and TSX 219, there will be two packs, one for the
fi tness zone and another for the spa zone.
SmartTouch™ Control: Digital lighted control center operates all pump func ons, temperature
control, scheduled fi ltra on cycles, lights and workout modes. Refer to the Control sec on of this
manual for programming of personalized propulsion speed for custom workouts.
ProView™ and Accent™ Controls: Used to control all swim spa func ons. The topside is used to
control the water temperature, pumps, spa light, programmable fi ltra on cycles, and func ons.
The topside will display between the water temperature and the me, as well as display error
codes rela ng to service needs.
(Synergy Series FX ‐ ProView™ shown.)
Circula on Pump: A dual speed pump designed to use low speed for water fi ltra on and hea ng
and a high speed for hydrotherapy. The jets one bu on on the topside control will ac vate the
circula on pump. The FX219, FX219s, SX219 and SX219s will have a second circula on pump for
the spa zone.
Heater: Your swim spa is equipped with a thermostat control at the spa side (topside control).
Set the swim spa at the temperature you enjoy. Leave the thermostat at that se ng, and the
swim spa will automa cally maintain the correct temperature; ready for your enjoyment any me.
Avoid constant rese ng of the thermostat; it is more economical to maintain temperature.
Never raise the temperature above 104 degrees. Never raise temperature above 86 degrees
for exercising.
(Heater is integrated in the Support Pack as described above.)
Dual zone models have a
separate heater for both the fi tness zone and the hot tub zone allowing the user to control
temperature in each best op mized for ac vity or relaxa on.
Parts Descrip on and Func on
9