PDS spas Summit Series, Руководство пользователя

Страница: 9 / 88

5. These units are not provided with an outdoor antennae; when provided, it should be installed in accordance with Ar cle
810 of the U.S. Na onal Electrical Code, ANSI/NFPA 70.
6. Do not service this product yourself as opening or removing covers may expose you to dangerous voltage or other risk of
injury. Refer all servicing to quali fi ed service personnel.
7. When the power supply connec on or power supply cord(s) are damaged; if water is entering the audio/video compart ‐
ment or any electrical equipment compartment area; if the protec ve shields or barriers are showing signs of deteriora on;
or if there are signs of other poten al damage to the unit, turn o ff the unit and refer servicing to quali fi ed service personnel.
8. This unit should be subjected to periodic rou ne maintenance (for example, once every 3 months) to make sure that the
unit is opera ng properly.
ADDITIONAL SAFETY CONSIDERATIONS

Install the swim spa to provide drainage for compartments of electrical components.

For fl oor recessed swim spas: Install to permit access for servicing from above or below the fl oor. Swim spa equipment must
be installed below water level.

When planning your swim spa installa on site, prepare for the unlikely event of rapid swim spa drainage.

Do not place swim spa in direct sunlight while unit is empty or when sealed in shipping materials. Excessive heat build may
cause damage to swim spa and void warranty.

When installing swim spa, allow ample space for future servicing, no ng loca on of all support equipment per the model
speci fi ca ons.
SAVE THESE INSTRUCTIONS
Safety Instruc ons
6