PDS spas Summit Series, Руководство пользователя

Страница: 52 / 88

Opera on Systems Synergy™ Series | FX ‐ ProView™ Control
49
Addi onal Se ngs
Hold Mode
Hold Mode is used to disable the pumps during service func ons like cleaning or replacing the fi lter. Hold Mode will last for 1 hour
unless the mode is exited manually. If spa service will require more than an hour, it is best to simply shut down power to the spa.
U li es
The U li es Menu and Preferences selec ons are to be accessed only by quali fi ed service techs.
Temp Display: Change the temperature between Fahrenheit and Celsius
Time Display: Change the clock between 12 hr. and 24 hr. display.
Reminders: Turn the reminder messages (like “Clean Filter”) On or O ff .
Cleanup: Cleanup Cycle Dura on is not always enabled, so it may not appear. When it is available,
set the length of me Pump 1 will run a er each use. 0 ‐ 4 hours are available.
Color: Pressing the Select Bu on when Color is highlighted will cycle through 5 background colors available in the control.
Language: Change the language displayed on the panel.
Clean ‐ up Cycle
(op onal)
When a pump is turned on by a bu on press, a clean ‐ up cycle begins 30 minutes a er the pump is turned o ff or mes out.
The pump and the ozone generator will run for 30 minutes or more, depending on the system.
Freeze Protec on
If the temperature sensors within the heater detect a low enough temperature, then the water devices automa cally ac vate to
provide freeze protec on. The water devices will run either con nuously or periodically depending on condi ons.
GFCI Test
The Ground Fault Circuit Interrupter (GFCI) or Residual Current Detector (RCD) is an important safety device and is required
equipment on a spa installa on.
CE registered systems do not have an RCD Test Feature due to the nature of the electrical service. The end ‐ user must be trained
how to properly test and reset the RCD.
It is mandatory to verify proper installa on and func on of the GFCI or RCD. Users / owners are to manually test this safety
device prior to each use. Should the device not func on properly, shut the spa o ff at the breaker and contact service tech.
General
Most messages and alerts will appear at the bo om of the normally used screens. Several alerts and messages may be displayed in
a sequence. Some messages can be reset from the panel. Messages that can be reset will appear with a “right arrow” at the end of
the message. This message can be selected by naviga ng to it at pressing the Select bu on.
Water Temperature is Unknown
A er the pump has been running for 1 minute, the temperature will be displayed. – – –°F – – –°C NOTE: The icon on the main
screen will glow red when the heater is ac vated. The Jets 1 icon will also glow red while in low speed and the heater is ac vated.
Possible freezing condi on
A poten al freeze condi on has been detected. All water devices are ac vated. In some cases, pumps may turn on and o ff and the
heater may operate during Freeze Protec on. This is an opera onal message, not an error indica on.