3028
Turbo
Statistical Multiplexer
2-66
154001UA
Channel Status
Channel Status
Channel Status
Channel Status
Channel Status
The
CHANNEL STATUS
command provides information on flow control,
reverse flow control, data activity (in the last two minutes), remote and local
loopback status, and the polarity of the RS-232-C control leads.
Appendix J provides information on the EIA Signal Exceptions.
Front Panel Access
From the
COMMAND MODE
display:
PRESS:
NEXT or LAST
until
CHNL STATUS
displays on the second line
PRESS:
SELECT
PRESS:
NEXT or LAST
to choose a channel number
PRESS:
SELECT
The LCD displays:
2 03 12 -9 2
CHNL STATUS
Where
is
DRS xxx BO xxx
(Data Rate (Secondary) Select - Busy Out)
DTR xxx RTS xxx
(Data Terminal Ready - Ready To Send)
CTS xxx RI xxx
(Clear To Send - Ring Indicator)
DCD xxx DSR xxx
(Data Carrier Detect - Data Set Ready)
LLB xxx RLB xxx
(Local Loopback - Remote Loopback)
FC xxx RFC xxx
(Flow Control - Reverse Flow Control)
ACTIVITY zzz
PRESS:
NEXT or LAST
to scroll through status
To update the channel status display:
PRESS:
SELECT
Note
xxx is ON or OFF depending on the
selection. zzz is YES or NO depending on
the selection.