2. Operation of the 3028
Turbo
Multiplexer
154001UA
2-71
The
SET SYSTEM PASSWORD
command is used to set or change the pass-
word required to access the supervisory functions. A fixed password entry
protects against entry by unauthorized users. Before the prompt is displayed to
enter a new password the correct fixed password must be entered. This func-
tion is only available from an attached terminal. The password can be any
combination of alphanumeric characters and symbols, except RETURN, up to 19
characters.
To access
SET SYSTEM PASSWORD
from the Main Menu:
TYPE:
18
PRESS:
RETURN
The terminal displays:
Enter the fixed password
)&(
If the incorrect entry is made, the prompt is repeated two more times for the
correct entry. If the correct entry is made, the screen displays:
TYPE:
password (password = the selected password)
PRESS:
RETURN
To delete a password completely, enter a
CARRIAGE RETURN
for the new
password entry.
The terminal displays:
TYPE:
password (password = the same entry as above)
PRESS:
RETURN
PRESS:
RETURN
to exit without gaining access
Set System Password
Set System Password
Set System Password
Set System Password
Set System Password
2 0 3 1 2 -4 4
ENTER FIXED PASSWORD <CR>:
2 0 3 1 2 -4 5
ENTER NEW PASSWORD <CR>:
2 0 3 1 2 -4 6
ENTER AGAIN TO VERIFY <CR>:
