3028
Turbo
Statistical Multiplexer
2-22
154001UA
The
STOP BITS
parameter establishes the number of stop bits generated for an
outgoing asynchronous character. For incoming characters to the 3028
Turbo (CTS
2031 Turbo)
this parameter is not critical since only one stop bit is looked for. Some
terminals, however, will not operate correctly unless two stop bits are appended to
each character sent toward them. Stop bits are not transmitted across the compos-
ite link.
Front Panel Access
From the
COMMAND MODE
display
PRESS:
NEXT or LAST
until
CHNL PARAMETERS
displays on the second line
PRESS:
SELECT
PRESS:
NEXT or LAST
to choose a channel number
PRESS:
SELECT
PRESS:
NEXT or LAST
until
CHNL n STOP BITS
displays on the second line
PRESS:
SELECT
the LCD displays:
2 03 12 -6 5
CHNL n STOP BITS
Where
is
1
1.5
2
PRESS:
NEXT or LAST
until the desired option displays
PRESS:
SELECT
The multiplexer updates the channel stop bits and returns the
CHNL PARAM-
ETERS/CHNL PARITY BITS
display.
Update the channel parity bits,
PRESS:
MON/CLR
to exit, or
PRESS:
NEXT or LAST
to go to another parameter
Channel Stop Bits
Channel Stop Bits
Channel Stop Bits
Channel Stop Bits
Channel Stop Bits