Compax3
T11: Positioning via Profibus (I20) or Profinet (I32)
C3I20T11 / C3I32T11
26
192-120103 N13 C3I20T11 / C3I32T11 December 2010
Due to its high functionality, the Positioning version of Compax3 forms an ideal
basis for many applications in high-performance motion automation.
Up to 31 motion profiles with the motion functions:
Absolute or relative positioning,
electronic gearbox,
register-related positioning,
speed control,
Stop - Set
...
can be created with the help of the PC software.
Via different operating modes:
Speed Control
Direct positioning
Positioning with set selection
the motion functions can be triggered via the bus.
A number of different transfer telegrams, which can be conveniently adjusted with
the Compax3 ServoManager), can be used to adjust cyclic bus communication to
the requirements of specific applications.
High-performance control technology and openness for various sender systems
are fundamental requirements for a fast and high-quality automation of movement.
The structure and size of the device are of considerable importance. High-quality
electronics are a fundamental requirement for the particularly small and compact
form of the Compax3 devices. All connectors are located on the front of the
Compax3S.
Partly integrated mains filters permit connection of motor cables up to a certain
length without requiring additional measures. EMC compatibility is within the limits
set by EN 61800-3, Class A. The Compax3 is CE-conform.
The intuitive user interface familiar from many applications, together with the
oscilloscope function, wizards and online help, simplifies making and modifying
settings via the PC.
2. Compax3 T11: Positioning via
Profibus (I20) or Profinet (I32)
Compax3 control
technology
Model / standards /
auxiliary material
