User Manual For CYCLONE
FX
Programmers
116
Figure 11-25: Save PEmicro JSON File Window
11.6.5.3 Loading a Barcode Test (.bar) File
PEmicro JSON Barcode Test (.bar) Information can be loaded into this utility so it can be edited
further or to test other barcodes.
To load a Barcode Test (.bar) file, click on the
Load File
button in the control area of the main
screen.
Figure 11-26: Program Control Area
If a filename (editable) exists in the control area, the program tries to load test information from that
file. If no filename exists, then the window shown below is opened to search for and/or edit a
filename. If Open is clicked, the program attempts to load the test information from that file. On
attesting to load a file, the button is recolored respectively on Success or Failure to Load File or
LoadFile .
Figure 11-27: Load PEmicro JSON File Window
11.6.6
Advanced Program Use
11.6.6.1 Bulk Copy Option
Often, it is required to make many transfers from
Sample
characters to
Char Test(TYPE):
entries or from
Char Test(TYPE):
entries to
Range-1
or
Range-2
. These transfers are usually
done by individually clicking on appropriate down arrows. For large barcodes, this can be very time
consuming. With Bulk Copy, Sample characters can be selected / deselected by a mouse entry
