Panasonic KX-TVS75, Руководство по установке

Страница: 87 / 318

4.2 CONNECTING THE KX-TVS75/100/200 WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD308
INTEGRATING THE VPS WITH THE PANASONIC KX-TD DIGITAL PBX
87
c)
Press
the
NEXT
button (SP-PHONE).
Screen output: VM-1:#_ _ -1: 295
( _ _ = the port number you entered in program 117)
d)
Enter the extension number that you want this port to have.
(The default extension number for port 1: 295; port 2: 296)
e)
Press STORE.
f)
Repeat c, d, and e until all extension numbers are entered.
4.
Unplug or power down the KX-TD308.
5.
Connect the jack(s) assigned in step 2 to the KX-TVS75/100/200. If your VPS is a 2-port
system, only 1 jack will be assigned. If your VPS is a 4-port system, assign 2 jacks from the
same cabinet.
6.
Connect your laptop computer to the KX-TVS75/100/200 and start your communication
software (i.e. HyperTerminal, Procomm Plus, Smartcom...).
Communication Parameters: 9600, 8 Bit, None, 1, VT100
7.
Turn the rotary switch on the KX-TVS75/100/200 to position 5.
Only perform this step when initially setting up the system.
CAUTION
Turn the rotary switch to position 5 will default the Voice Processing System, resulting in a
loss of all user programming and voice messages.
8.
Plug in and power up the KX-TVS75/100/200 and wait approximately 90 s while the
system initializes.
"System Administration" Start-Up Sequence
Before starting the VPS, make sure all installation and line connections have been
done as described in Section 2.
Plug in and
turn
the power switch to
ON
on the KX-TD308. The calls to the VPS can be
processed after the Power Indicator stops flashing.
After turning the power on, the system starts up in the following sequence:
• The Power Indicator light goes on.
Conditions: No 2 jacks on the system can have the same extension
number. If you try to enter a number that is already
assigned, you will hear an error tone. Each digital
extension connected provides 2 Voice Mail ports and
must have 2 different extension numbers assigned.