Panasonic KX-TVS75, Руководство по установке

Страница: 124 / 318

5.5 SETTING MAILBOXES
124
CUSTOMIZING THE SYSTEM
Enter the data using the following table as a guide.
Table 30
Description Value Range
(Default)
Description/Function
Number to
Dial
Up to 32 Digits of
[1-9,0, ,#,P,T,M,X]
(None)
Assigns the telephone or beeper number to Device
1, 2 and/or 3.
P: Pause
T: Dial Tone Detection
M: Dial Mode Switching Code (DTMF to Pulse, or
Pulse to DTMF)
X: Callback Number Entry Code
1-9, 0, , #: Dial Codes
The callback number entry code (X) must be
entered if COS is set to enable and set to beeper.
Use backspace to delete your entry.
Type 1. Telephone
2. Beeper
(Telephone)
Assigns whether device is beeper or telephone.
Use Device
1. Not Use
2. Continuously
3. Scheduled
(Continuously)
Not Use: Does not use device.
Continuously: The VPS notifies each time a
message is recorded in the mailbox.
Scheduled: The VPS notifies the subscriber if a
message is left during one of the time frames.
Number of
Retries 0-9 Times
(0)
Specifies the number of times a device should be
retried when busy or no-answer.
Busy Delay 0-120 mins.
(3)
The time the VPS will wait before retry on busy.
No Answer
Delay 0-120 mins.
(30)
The time the VPS will wait before retry on No
Answer.
Time Frame 1,
2
MON - SUN 1-12: hour
00-59: minute
AM/PM: am/pm
: All Day
Space: No Use
Weekly Schedule for Message Waiting
Notification. The schedule is only used when Use
Device is set to Scheduled.