Panasonic KX-TVS75, Руководство по установке

Страница: 217 / 318

B5 SYSTEM ADMINISTRATION - SERVICE SETTING
SYSTEM ADMINISTRATION
217
Note
An operator-seeking call is always first transferred to Operator 1. The call is then
transferred to Operator 2 and Operator 3 respectively, depending on system programming.
"Next Operator" cannot be set for "No-answer Coverage Mode" of Operator 3.
Operator's Parameters - Operator 1, 2, 3, - Night Mode
Same as Day Mode.
Alternate Extension Assignment
Used to assign extensions that should be transferred differently from the normal extension
transfer sequence. Calls to the extensions in this group will be transferred following the
sequence defined by "Alternate Extension Transfer Sequence" (See "Alternate Extension
Transfer Sequence" in Table 76 in B7.3
PBX Interface Parameters).
Alternate Extension Group - Enter
The system can create up to 32 extensions that use the same alternate transfer sequence.
Alternate Extension - Delete
The system can delete extension numbers from the alternate extension group.
To select the Alternate Extension Assignment Parameter, follow the menu path as
shown:
System Administration Top Menu - 1 - 4 - 1 - 3
To select the Alternate Extension - Enter Parameter, follow the menu path as shown:
System Administration Top Menu - 1 - 4 - 1 - 3 - 1
Table 53
Parameter Value Range
(Default)
Description/Function
Alternate
Extension
(1-32) 2-5 digits
(None)
Specifies an extension, which requires a different
transfer sequence than normal.