Panasonic KX-TVS75, Руководство по установке

Страница: 89 / 318

4.2 CONNECTING THE KX-TVS75/100/200 WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD308
INTEGRATING THE VPS WITH THE PANASONIC KX-TD DIGITAL PBX
89
9.
Start up completed.
a)
The Power Indicator light stops blinking when the start-up has been successful. (The
delay varies according to the system's condition.)
b)
"**ON LINE MODE**" is displayed.
c)
System prompt [>] is displayed on the screen. To enter system administration,
Press
ENTER
.
When the System Administrator starts operation, the system asks for the terminal type.
By choosing VT100 [2], all parameters can be set through the menu-driven program.
Please Enter the Number :=
[2]
Select
[2]
because Quick Setup is only available when using a VT100 terminal.
10.
Go to the System Administration Top Menu. Select
[5]
for Quick Setup and follow the
Automatic Configuration Instructions.
Turn the rotary switch to position 0 after initialization is complete.
The PBX is not programmed properly
to support DPT Integration. Do required integration
programming as described in
this chapter.
Please Select Your Terminal Type.
1. ASCII TERMINAL
2. VT100
Please Enter the Number :=
TEST: Go to intercom Press tone and Press [295]. If the VPS answers,
you have a DPT connection.
The required programming is complete and the VPS and KX-TD308 should be able to
communicate through Digital Integration.
We recommend that the KX-TD308 system have any optional extension cards and telephones
connected before starting the VPS. When running the Quick Setup command (Section 5
CUSTOMIZING THE SYSTEM) from the VPS, the PBX transmits the station information
automatically. This saves time when programming the VPS.
Table 22
Cause Remedy