Panasonic KX-TVS75, Руководство по установке

Страница: 230 / 318

B6 SYSTEM ADMINISTRATION - SYSTEM PARAMETER SETTINGS
230
SYSTEM ADMINISTRATION
Other Parameters - Message Waiting Notification
The following parameters are used to control the handling of message notification calls.
Outgoing Call
Setup
Sequence Up to 12 digits con-
sisting of 0-9, , #,
F, R, S, T, W
(T)
Specifies the sequence of codes used by the VPS when
calling an outside line. Up to 12 digits can be set. The
default value is "T." "T" indicates that the system will dial
the outside phone number only after detecting a dial tone.
Example:
9W = (9) - 1-s wait - dial outside phone number.
"9" is the CO line access number.
F: Hook Flash
R: Ring Back Tone Detection
S: Silence Detection
T: Dial Tone Detection
W: Wait for 1 s
1-9, 0, , # : Dial Codes
To select the Message Waiting Parameter, follow the menu path as shown:
System Administration Top Menu - 1 - 5 - 6 - 3
Table 63
Parameter Value Range
(Default)
Description/Function
Outgoing Call
Ports Port No.
(1, 2, 3, 4)
Specifies the port numbers used for the Message Waiting
Notification Device feature. The VPS makes outgoing
calls using the port specified in this field. At least 1 port
must be specified.
Note
: The value range depends upon the VPS model.
TVS75: 1-2, TVS100: 1-4, TVS200: 1-12
Table 62
Parameter Value Range
(Default)
Description/Function