Panasonic KX-TVS75, Руководство по установке

Страница: 197 / 318

B2 SYSTEM ADMINISTRATION - MAILBOXES
SYSTEM ADMINISTRATION
197
• If the destination device is a beeper, the subscriber will be notified when he has
message(s). If the beeper has a display, it is possible to send to it a callback number. The
callback number can be recorded when a caller leaves a message. If he does not leave a
callback number, the System Callback No. will be sent instead.
• The Message Manager (COS No. 63) programs Notification Setting parameters for
managers.
To access the proper menu for Message Waiting Notification, follow the menu path
as shown:
System Administration Top Menu - 1 - 1 - 1 - Mailbox No. - 2 - Device No. 1, 2,
or 3.
Table 43 Notification Setting - Device 1-3
Parameter Value Range
(Default)
Description/Function
Number to Dial Up to 32 digits
consisting of 1-9,
0, , #
P, T, M, X
(None)
Assigns a telephone or beeper number to Device 1, 2, or 3. The
Subscriber can also specify the dial number from his
telephone.
P : Pause
T : Dial Tone Detection
M : Dial Mode Switching Code (DTMF to Pulse, or Pulse to
DTMF)
X : Callback Number Entry Code
1-9, 0, , #: Dial Codes
Note
: The callback number entry code "X" must be included
in the number to be called if the Beeper Callback No. Entry
Mode is enabled through COS and "Type" is set to "Beeper."
The proper number of "Pauses" must be inserted before the
callback entry code. The Subscriber can also specify the dial
number.
Type 1. Telephone
2. Beeper
(Telephone)
Specifies the device to be notified. This is automatically set to
"Beeper" when "X" is used in the Number to Dial (above). The
Subscriber can also specify the type from his telephone.
Use Device 1. Not Use
2. Continuously
3. Scheduled
(Continuously)
Specifies how Device 1, 2, or 3 is to be used. The Subscriber
can also specify the use device from his telephone.
1. Not Use - Device 1, 2, or 3 is not used for a notification call.
2. Continuously - Device 1, 2, or 3 is called whenever a
message is recorded in the mailbox.
3. Scheduled - Device 1, 2, or 3 is called on a schedule basis
when a message has been left in the mailbox.