Panasonic HG-S Series, Руководство пользователя

Страница: 119 / 200

FUNCTION SETTINGS
© Panasonic Industrial Devices SUNX Co., Ltd. 2019 5-47
*When the calculation function is used, the calculation value is “CALC”.
<Reference>
● When self sample hold is selected, external trigger input is invalid.
● When a sensor head not connected error or pressure alarm / error is cleared, the same action
as a reset takes place.
Setting item
●
Self trigger level (SLF.LV)
You can set the level that starts stabilization diagnosis of the normal measured value (NORM.V).
* The self trigger level setting for self sample hold (static width) sets the level for start of sta-
bilization diagnosis of the internal judgment value.
Setting item Set values / setting range Default value
Self trigger level (SLF.LV) -199.9999 to 199.9999 (mm) 0.5000
● Self trigger edge direction (SLF.EDG)
You can set the edge direction for triggering of the self trigger.
Setting item Set values / setting range Default value
Self trigger edge direction (SLF.EDG) Rise (UP)
Fall (DOWN)
UP
●
Self trigger delay (SLF.DLY)
You can set whether the normal measured value (NORM.V) is held after it stabilizes, or after
the delay time elapses.
Setting item Set values / setting range Default value
Self trigger delay (SLF.DLY)
Static width (DLY.WD)
Delay timer (DLY.TIM)
DLY.WD
●
Static width (DLY.WD)
You can set the static width (allowed fluctuation width) of the normal measured value (NORM.V).
Setting item Set values / setting range Default value
Static width (DLY.WD) 0 to 199.9999 (mm) 0.01