Panasonic HG-S Series, Руководство пользователя

Страница: 106 / 200

FUNCTION SETTINGS
© Panasonic Industrial Devices SUNX Co., Ltd. 2019 5-34
■ Peak to Peak Hold (Trigger mode: Hold)
With respect to normal measured values (NORM.V) during any sampling interval, the difference
between the peak value (maximum value) and the bottom value (minimum value) is held as the
judgment value (JUDGE.V).
Timing chart
0
6
Normal measured value
(
NORM.V
)
*
Indeterminate state is held.
Outputs OUT1 / OUT2 / OUT3 according to output setting.
HIGH set value
LOW set value
ON
ON
OFF
OFF
TRIG
indicator
HOLD
indicator
Judgment value
(
JUDGE.V
)
1. Based on the peak to peak setting (peak value to bottom value), the judgment value (JUDGE.
V) is gradually updated from 0.
2. The judgment value (JUDGE.V) is held while the external trigger input is ON.
3. If the reset input turns ON while the external trigger input is OFF, an indeterminate state oc-
curs during the response time. All outputs remain OFF during an indeterminate state.
4. After the response time elapses, the indeterminate state is released.
5. If the reset input turns ON while the external trigger input is ON, the indeterminate state is
held until the external trigger input turns OFF.
6. Judgment output outputs the judgment result based on the output setting.
* When the calculation function is used, calculation value “CALC” is shown instead of normal
measured value (NORM.V).