3
Viewing Camera Images
68
Sensor Notification Screen
If a camera sensor detects motion when Sensor Alert mode is on, the Monitoring
Screen switches to the relevant camera, and that camera lens moves to the sensor
position. The sensor position is set as indicated on page 60.
Note
•
After the Sensor Notification Screen is displayed, the camera is set to
repeat sensor responses every several seconds, and those responses will
not be displayed. The sensor must go for roughly 5 seconds without
activation. If another camera’s sensor is triggered, however, the display
will switch to that camera.
•
If a camera's sensor triggers Sensor Alert mode, the camera's image will
not be displayed if:
-
The TV's video input is not set to the input which the BL-WV10A is
connected to
-
You are currently recording a camera image (using standard
recording)
-
You are accessing the [Sensor Alert] or [Setup] screen.
-
You are taking a snapshot
-
You have set the timer record or sensor record feature.
In these situations, you will still be alerted to sensor detection by the flashing of the
sensor indicator and by the buzzer, if you have the buzzer turned on.
•
When viewing the television, you cannot switch to a sensor-activated
screen. Press [INPUT] on the remote control to switch to the camera
Monitoring Screen.
•
The buzzer volume can be adjusted (see page 97).
•
If you have hidden the camera's image (see page 56), the camera's image
will be displayed if the sensor is triggered.
