![background image](http://html1.mh-extra.com/html/panasonic/bl-wv10a/bl-wv10a_operating-instructions-manual_3606778036.webp)
2
Connecting Cameras
36
1.
Connect the cameras using the Ethernet cables provided with them to any of
the LAN jacks on the BL-WV10A or BB-HGW700A.
•
Connect the cameras while the BB-HGW700A is connected to the BL-
WV10A.
2.
Turn on the cameras.
•
Quick Setup will register each camera.
Note
•
If a camera needs to be restarted during Quick Setup, camera
configuration and restart will take about 2 minutes.
•
During Quick Setup, the wireless indicator will be green.
Ethernet cable
LAN jacks
Rear of camera
Rear panel of
BL-WV10A
Switch
Bottom of BL-C30A
To configure a BL-
C30A wireless camera
using the Quick Setup
utility, set the switch on
the bottom of the
camera to [WIRED]
Ethernet cable
Rear panel of BB-HGW700A