![background image](http://html1.mh-extra.com/html/panasonic/bl-wv10a/bl-wv10a_operating-instructions-manual_3606778133.webp)
10
Adding Cameras
[For assistance, please call: 1-800-272-7033]
133
•
When registration is complete, the buzzer will sound and the wireless
indicator will flash once for each of the cameras registered.
•
The Quick Setup screen will appear differently based on the network on
which it is used.
•
The camera can also be registered manually (see page 105). However,
any additional cameras will be registered as remote cameras.
Note
•
To add more cameras, connect the Ethernet cable to the camera to be
added, and re-perform step 2.
3.
Once all of the cameras have been registered as in step 2, set the mode
switch on the back on the BL-WV10A to [NORMAL], turn the BL-WV10A off
and then turn it back on again.
4.
Confirm the camera images.
•
Place the cameras after confirming that they display images correctly.
When camera
registration is
complete,
[Finished] is
displayed.