![background image](http://html1.mh-extra.com/html/panasonic/bl-wv10a/bl-wv10a_operating-instructions-manual_3606778102.webp)
6
Setup Menu
102
Note
•
Use the same encryption key number and type for any wireless terminal to be
connected.
Note
•
To register a BL-C30A, you will need to specify 2 MAC addresses. Choose the
MAC address indicated on the base of the BL-C30A and one from the following
table based on the last digit in the BL-C30A's MAC address.
For example, if the MAC address for the BL-C30A is 00:80:F0:54:C0:C4, you
should specify 00:80:F0:54:C0:C4 and 00:80:F0:54:C0:C5.
Certain changes may require the BL-WV10A to restart.
Channel
The communications channel to be used can be chosen from
either AUTO or a number between 1 and 11.
Choosing AUTO will allow the BL-WV10A to automatically
detect an available channel at launch. If the quality of the
connection is not, you can manually choose another channel
as well.
Encryption
Choose to turn encryption either on or off.
Sets an encryption key when encryption is turned on.
Encryption
Key
Sets an encryption key when encryption is turned on.
Up to 4 encryption keys can be set in advance.
Allowable keys:
Choose from encryption keys 1 through 4 to use with
encryption.
Key types:
The types of encryption keys are 64 bit (10 hexadecimal digits
or 5 letters), 128 bit (26 hexadecimal digits or 13 letters), or 152
bit (32 hexadecimal digits or 16 letters). The level of security
increases with the number of bits, but there may be a slight
decrease in network speed as a result.
Keys 1 through 4:
Enter an encryption key that corresponds in length to the type
selected.
MAC Address
Filtering
Choose to either turn MAC address filtering (to specify the
addresses of connected devices) on or off. Turning it on will
allow you to specify the MAC addresses of the devices which
are allowed to connect. Up to 16 address can be specified.
0 —> 1
2 —> 3
4 —> 5
6 —> 7
8 —> 9
A —> B
C —> D E —> F
Setting
Description