![background image](http://html1.mh-extra.com/html/panasonic/bl-wv10a/bl-wv10a_operating-instructions-manual_3606778075.webp)
4
Recording Images
[For assistance, please call: 1-800-272-7033]
75
4.2
Standard Recording
During standard recording, images are recorded at the displayed resolution (see
page 124).
1.
Insert an SD memory card into the BL-WV10A (see page 72).
2.
While monitoring a single camera, press [RECORD].
•
Recording begins.
3.
To stop recording, press [STOP].
•
A list of all movies can be viewed on the [Movies] screen (see page 88).
•
Press [DISPLAY] while recording to display information on the recording
(see page 90).
Note
•
Neither remove an SD memory card nor turn off the BL-WV10A while it is
in ordinary recording mode. Doing so will cancel the recording and may
corrupt the data on the card. If this occurs, you will need to reformat the
card with the BL-WV10A (see page 120).
•
During standard recording, a maximum of 15 frames per second (fps) can
be recorded. Results will vary depending on network conditions.
4.3
Snapshot Recording
A picture of the image being monitored is saved to an SD memory card.
1.
Insert an SD memory card into the BL-WV10A (see page 72).
2.
Display the Monitoring Screen and press [SNAPSHOT].
•
Upon pressing [SNAPSHOT], the image being monitored will be saved as
a picture to the SD memory card.
•
A list of recorded pictures can be viewed on the [Pictures] screen (see
page 92).
Shown in upper-right corner
of screen for 4 seconds after
recording has started
Status indicator: Red
CAM1
Recording
Shown in upper-right corner
of screen while snapshot is
being taken
Status indicator: Red
CAM1
Recording