15
Error Messages
[For assistance, please call: 1-800-272-7033]
141
Standard Operation Mode Error Messages
Error Message
Causes and Solutions
Incorrect security code.
This error is displayed if the security code entered
to enter the [General Setup] or [Camera Setup]
screens in incorrect.
•
Enter the correct security code. If you've
forgotten it, press the FACTORY DEFAULT
RESET button to reset the device and re-
register the camera using Quick Setup.
Cannot connect
to camera.
This error is displayed when the camera cannot
be accessed.
•
Check the camera's power and connections
and its IP address as displayed in the Camera
Settings.
•
If using wireless cameras, refer to the wireless
communications information on page 6.
Cannot communicate with
the camera.
This error is displayed when the camera cannot
be accessed.
•
Check the camera's power and connections
and its IP address as displayed in the Camera
Settings.
•
If using wireless cameras, refer to the wireless
communications information on page 6.
Settings could not be
saved.
This error is displayed if a camera's access is lost
when changing local camera settings.
•
Check the camera's power and connections
and its IP address as displayed in the Camera
Settings.
This error can also be displayed if unusable
characters were used to register a camera name
for preset registration or local camera settings.
•
Register using appropriate characters.
Enter a name for the
Preset.
This error appears if, during preset registration,
the registered name field is left blank.
•
Enter a preset registered name.
