ORTE Pellet Comfort 10, Техническая и эксплуатационная документация, руководство по эксплуатации и обслуживанию, гарантия

Страница: 29 / 39

www.orte.pl
www.orte.pl
Page | 29
8.1. Cleaning the boiler
REMEMBER!!! IF YOU WANT TO TURN OFF THE DEVICE – USE THE STOP BUTTON ON THE
CONTROL PANEL. DO NOT UNPLUG IT BECAUSE OF THE RISK OF EXPLOSION.
DANGER: Before cleaning the device, make sure that it is unplugged and that it has been turned off for at
least 3 hours.

Remove the feeder pipe from the burner fireplace (bent tube with the thermal sensor)

Open the doors where the burner is

Carefully remove ash from the burner tube and from the burning chamber (you can use a fireplace
vacuum cleaner)

After removing ash, make sure that the doors are tightly closed and secured (lock on the round
handle must be in the horizontal position)

Plug the feeder pipe to the fireplace (make sure that it is pushed to the burner cover)
Then:

Open and clear covers on the boiler and the cover placed on the top of the boiler,

Using a fireplace vacuum cleaner, clean ash on the walls of the boiler and above the burner pipe.
8.2. Cleaning the burner
INFO: The burner can be cleaned only by opening the doors, without unscrewing it.
1 Before cleaning the burner, turn off the device (press STOP on the controller)
and wait at least 2 hours. Then unplug the device.
In order to reach the
burner, unscrew the exchanger cover, below the controller.
2 Remove the feeder pipe from the burner fireplace.
3 Remove the burner cover.