ORTE Pellet Comfort 10, Техническая и эксплуатационная документация, руководство по эксплуатации и обслуживанию, гарантия

Страница: 14 / 39

www.orte.pl
www.orte.pl
Page | 14

Before starting up the system, carefully read safety tips.
Threat due to non-compliance with safety rules in emergency situations, e.g. in case of fire

Never put yourself in life-threatening situations. Your own safety
always comes first.
Damage due to improper operation
Operation errors can lead to injuries and/or damage to property.

Ensure that the boiler can only be accessed by persons who are able to properly operate it.

Only authorized installers can install, commission and maintain the boiler.
Installation and operation

Only an authorized installation company can install the boiler.

Do not modify any parts of the exhaust system.

Do not use the boiler without enough water.

Do not connect the boiler directly to a hydrophore.

During operation, openings (doors, inspection hatch, filling holes) must always be closed.

Use fuels according to the nameplate.

Do not close or decrease supply-exhaust openings in doors, walls and windows.
Inspection/maintenance

Recommendation: conclude an agreement for inspection and maintenance with an installation
company; order boiler maintenance every year.

The user is responsible for the safety, environmental performance and reliable operation of the
system.

Adhere to the safety instructions contained in the chapter “Maintenance and cleaning”.

The manufacturer is not responsible for damages due to the use of parts not delivered by the
manufacturer.

Use only original spare parts and hardware.
Risk of carbon monoxide poisoning

Insufficient air supply can cause the production of carbon monoxide during the combustion process.

Do not close or decrease supply-exhaust openings.

Appropriate carbon monoxide and smoke sensors should be installed in the boiler room.

If this deficiency is not removed immediately, further use of the boiler is not allowed.

If fumes are present in the boiler room, ventilate and leave the room; call the fire department, if
necessary.
Burn hazard

Hot air on the boiler, exhaust system and pipes, exhaust gas, as well as hot water flowing from the
protection automation devices can cause burns.

Touch hot surfaces only when using appropriate safety equipment.

Opening the boiler doors is forbidden.

Before performing any work on the boiler, wait until it cools down.

Children must not remain near the hot boiler unattended.
Risk of damage to the system due to deviations from the minimal chimney draft.

In case of major chimney drafts, the fumes temperature increases and the boiler system is under
heavier load and may be damaged. The efficiency of the boiler decreases.

Ensure that the chimney and exhaust connections correspond to applicable regulations.

Ensure proper chimney drafts.

Ask an authorized company to check that the required chimney draft is ensured.

Adhere to local regulations regarding maintenance of the chimney.
Explosives and flammable materials