![background image](http://html.mh-extra.com/html/omron/xpectia-fz3/xpectia-fz3_user-manual_1633321087.webp)
2
Measurement
FZ3 Processing Items List Manual
EC Circle Search
85
List of EC Circle Search Items
EC circle search items are explained below.
Item name
Description
Circle
register
This item sets the size of the circle to search for.
Reference:
Circle Setting (EC Circle Search) (p.85)
Region
setting
This item is used to set up the measurement area.
Narrowing the measurement area instead of measuring the entire input screen shortens the
processing time.
Reference:
Region Setting (EC Circle Search) (p.86)
Ref. position
This item can be changed if necessary.
Usually, the central position of the registered region is specified as the reference position.
Reference:
Reference Position (EC Circle Search) (p.87)
Color setting
This item can be changed if necessary.
Select the color of the circle and the background color.If no check is placed at color setting, the
circle (edge) is extracted using the brightness difference.
Reference:
Color Specification (EC Circle Search) (p.88)
Measurement
This item changes the measurement parameter as necessary when the measurement result is
unstable.
Reference:
Measurement Parameters (EC Circle Search) (p.89)
Output
parameter
This item can be changed if necessary.
Normally, the factory default value will be used.Use the output parameter to specify how to handle
the coordinates.
Reference:
Output Parameters (EC Circle Search) (p.91)
Circle Setting (EC Circle Search)
This item registers the size of the circle to search for.
Set the circle size only with the circumference figure.
1.
In the Item Tab area, tap [Circle register].
When setting a new circle, you do not need to tap [Circle register].
2.
Set the search circumference using the drawing tools.
3.
In the figure setting area, tap [OK].
The circle to search for is registered.
4.
Tap [Edge extraction] and set values.
Reference:
Extracting edges (p.85)
Extracting Edges
In an EC circle search, processing is executed on the edge extraction image.Change this item as
necessary when the edge is not extracted or is extracted along with noise.
1.
In the Item Tab area, tap [Edge extraction].
2.
In the "Edge extraction setting" area, tap [...] or [
] for each item and set the values.
The "Edge level" value can be specified by dragging the slider or tapping one of the buttons at
either end of the slider.
Acesst 1.0 6251194
Содержание XPECTIA FZ3
