Omron XPECTIA FZ3, Руководство пользователя

Страница: 154 / 440

2
Measurement
152 Scan Edge Width FZ3 Processing Items List Manual
Setting item Set value Description
Edge width
Max. 0 to dist
(X_MAX,Y_MAX) Specify the upper and lower limits of the maximum width judged
to be OK.
Edge width
Min. 0 to dist
(X_MAX,Y_MAX) Specify the upper and lower limits of the minimum width judged
to be OK.
Edge width
Ave. 0 to dist
(X_MAX,Y_MAX) Specify the upper and lower limits of the average width judged to
be OK.
Lost width
count
0 to 100
Specify the upper and lower limits of the lost width count judged
to be OK.
* dist (X_MAX,Y_MAX) = sqrt (X_MAX*X_MAX+Y_MAX*Y_MAX)
Output Parameters (Scan Edge Width)
Specify how to treat the coordinates to be output to the external device as measurement results.This
item can be changed if necessary.Normally, the factory default value will be used.
Important
●
After setting up the measurement parameters, changing the output parameters will cause measurement results
to vary accordingly.If the output parameters have been changed, re-specify the measurement, too.
1.
Tap [Output parameter] in the Item Tab area.
2.
Specify each of the following items.
Setting item
Set value
[factory
default] Description
Output
Coordinates
●
[After
scroll]
●
Before
scroll
As measurement results, select whether to output coordinate values
to external devices before or after the position deflection correction is
applied.
Calibration
●
[OFF]
●
ON
Select whether to reflect the calibration in the values output to the
external device as measurement results.
ON: Output the coordinates converted into actual dimensions.
OFF: Output the camera coordinate values.
Reflect to
overall
judgement
●
[ON]
●
OFF
Enables choosing whether or not the judgement results of this
processing unit is reflected in the scene overall judgement.
Acesst 1.0 6251194