![background image](http://html.mh-extra.com/html/omron/xpectia-fz3/xpectia-fz3_user-manual_1633321054.webp)
2
Measurement
52
Search
FZ3 Processing Items List Manual
Model
parameter
If the model image is a simple figure or a large figure, specify a smaller value for "Stab."If lowering
stability does not speed up processing, it is likely that many candidates have been detected. Raise
the "Candidate LV" in [Measurement].
When "Rotation" is selected and the model image is a simple figure, specify a larger value for
"Skipping angle".
When "Rotation" is selected and the model image is a simple figure, place a check at "Smart mode".
If the position precision is high, specify a smaller value for "Prec.".
If the rotation angle range is large, set the "Search mode" to "PT".
Measurement
If images that should be judged OK vary little, specify a larger value for "Candidate LV".
If the position precision is high, uncheck "Sub-pixel".
Measurement Results for Which Output Is Possible (Search)
The following values can be output using processing items related to results output. It is also possible to
reference measurement values from expressions and other processing units.
Measurement items
Character
string
Description
Judgement
JG
Judgement result
Count
C
Number of search items detected
If none detected, 0
Correlation value
CR
Correlation value with the model
Measurement coordinate X
X
X coordinate of the position where the model is detected
Measurement coordinate Y
Y
Y coordinate of the position where the model is detected
Measurement angle
TH
Angle of the position where the model is detected
Reference position X
SX
X coordinate of the reference position of the registered model
Reference position Y
SY
Y coordinate of the reference position of the registered model
Reference angle
ST
Angle of the registered model
Detection point RX
RX
X coordinate of the registered model
Detection point RY
RY
Y coordinate of the registered model
Correlation value N (N = 00
to 31)
CRN
Detected search N correlation value (N = 00 to 31)
Position N (N = 00 to 31)
XN
Detected search N position X (N = 00 to 31)
Position N (N = 00 to 31)
YN
Detected search N position Y (N = 00 to 31)
Angle N (N = 00 to 31)
THN
Detected search N angle TH (N = 00 to 31)
Acesst 1.0 6251194
Содержание XPECTIA FZ3
