![background image](http://html.mh-extra.com/html/omron/xpectia-fz3/xpectia-fz3_user-manual_1633321124.webp)
2
Measurement
122
Edge Position
FZ3 Processing Items List Manual
4.
When the setting has been changed, tap [Measurement] in the Detail area to verify whether
measurements can be made correctly.
5.
Set up the judgement condition.
Note
●
The values beside each item are measurement results of the displayed image.Take these values into
consideration to determine the upper and lower limits.
Setting item
Set value
Description
Edge position X
-99999.9999 to
99999.9999
Specify the range of X-axis shifting that is judged to be
OK.
Edge position Y
-99999.9999 to
99999.9999
Specify the range of Y-axis shifting that is judged to be
OK.
Output Parameters (Edge Position)
Specify how to treat the coordinates to be output to the external device as measurement results.This
item can be changed if necessary.Normally, the factory default value will be used.
Important
●
After setting up the measurement parameters, changing the output parameters will cause measurement results
to vary accordingly.If the output parameters have been changed, re-specify the measurement, too.
1.
Tap [Output parameter] in the Item Tab area.
2.
Specify each of the following items.
Acesst 1.0 6251194
Содержание XPECTIA FZ3
